Vacuum Filter - 10" diameter
|
This low cost 2-3/4 gallon (10" Diameter x 8" Height) capacity vacuum filter has many features which are an improvement over traditional designs. The aluminum barrel is attached with quick lever clamps. The coated steel base has a poly waffle grid drainage pattern. The base has a side drain for bench mounting. The cylinder bottom seals against pre-wetted filter paper and cloth on the base. Comes complete with filter cloth and package of 100 wet strength filter papers. The optional High-Seal filter cloth with bonded vinyl perimeter gasket is suggested for maximum solution recovery.
|
Vacuum filter shown assembled. |
For 100% liquid recovery, the optional high-seal gasketed filter cloth should be used.
This polyester cloth has a bonded vinyl perimeter and greatly reduces solution leakage.
|
|
|
Vacuum filter shown with barrel removed. |
Vacuum filter shown with barrel removed and with optional HIGH SEAL filter cloth. |
Accessories and replacement parts:
|
24625G 10" Filter paper, pack of 100
|
24625FHS 10" Gasketed Hi-seal filter cloth
|
24625F 10" Filter cloth
|
34625L 10" Cast vinyl base gasket
|
Dimensions: 12" x 12" x 10"
|
Shipping Weight: 60 lbs
|