Pressure Filter w/Barrel Lift, 8"

Made in the USA with high quality components, this 3-gallon (8" Diameter x 14" Height) capacity batch pressure filter has numerous features which are an improvement over traditional designs as well as the advantage of a barrel lift mechanism to eliminate the need to manually lift off and set the barrel aside. The lid screw utilizes acme thread which has much longer life and smoother action than standard threads. The hand wheel with speed handle greatly increases the ease and speed lowering and raising the lid. The new captured lid stays with the yoke assembly and eliminates additional handling. The yoke assembly tilts back and is self supporting.  After tilting the yoke assembly back, the mechanism lifts and pivots the barrel out of the way to easily remove the filter cake. The steel base has a poly waffle grid drainage pattern. The base has a side drain for bench mounting. The lid seals with a full diameter vinyl gasket and the cylinder bottom seals against pre-wetted filter paper and cloth on the base.

For 100% liquid recovery, the optional high-seal gasketed filter cloth should be used.



This polyester cloth has a bonded vinyl perimeter and greatly reduces leakage

Complete with pressure gauge, safety relief valve, bleed valve, quick connect air coupling, filter cloth, pkg of 100 wet strength filter papers and lid vinyl gasket.

 

Pressure filter shown with yoke tilted back for filling or barrel removal.

 

Pressure filter shown with yoke tilted back, barrel swiveled, and optional bonded vinyl seal filter cloth in place.

Accessories and replacement parts

24620G Filter paper, pack of 100

24620FHS Gasketed Hi-seal filter cloth

24620F Filter cloth

24905 Cast vinyl base gasket

Dimensions: 28" x 12" x 12"

Shipping Weight: 85 lbs (Without the Pallet)