Conical Slag Mold-8"

The Heat Resistant (HR) molds are made of a cast iron alloy with Copper (Cu), Manganese (Mn), Chromium (Cr), and Nickel (Ni) for increased heat resistance. HR molds are designed to provide higher durability, while remaining cost effective. These HR molds are made to withstand an additional 300 degrees (f) higher than standard cast iron molds. 

Approximate volume:
84 cubic inches
0.05 cubic feet
0.36 gallon (US liquid)
1376 cubic centimeters
1.38 Liters
0.0014 cubic meters