Lifterbottle® rolling table

KCA LIFTERBOTTLE® Jar Mill rolling table with variable speed control and tilt up support leg. 110-230volt/50-60hz.  Supplied with two prong plug for North American 115volt operation.  Other voltages may require a plug change.

Specification:
Body – 19 ga. steel construction
Height – 220mm (7.9") laying flat w/bottle, 300mm (11.8") inclined w/bottle
Width – 210mm (8.3")

Length – 500mm (19.7")
Bottle Cavity – 300mm (11.8") long x 150mm (5.9") wide x 70mm (2.8") deep (measured to the top of the roller).

 Includes: 
(1) Variable speed rheostat controller with 129cm (50") total cord length +9cm (3.5") for controller body

Approximate Minimum 14 RPM and Maximum 80 RPM

----------------

KCA LIFTERBOTTLE® sold separately