Skutt Envirovent II Ventilation System

Fresher room environment, consistent kiln environment.

Developed jointly with the Edward Orton, Jr. Ceramic Foundation, the patented Skutt EnviroVent is a truly effective kiln venting system.Removes fumes, odors, vapors. The EnviroVent draws out firing odors and vents them outdoors before they enter the studio or classrooms atmosphere. It is great for firing lusters, metallics and high sulfur clays.

Motor: 115 volt 1.1 amps 0.18 horsepower

Heat exiting blower: 160°F maximum

Static pressure: 0.2 inches distances greater than 60 ft: 0.4 inches

Blower 70 cfm * distances greater than 60 ft: 60 cfm

Maximum kiln capacity for use with EnviroVent: 14 cubic feet

Plate: 23" across

Improved firing consistency

The EnviroVent creates a down draft effect which greatly improves kiln temperature uniformity. You can now fire loads with reds at the top of the kiln and greens on the bottom with excellent results.

Fits popular kilns.

The EnviroVent fits Skutt 12, 10 and 8-sided kilns, as well as many other kiln brands.

Ideal for automatic kilns

The EnviroVent makes firing kilns such as the Skutt KM series much more convenient. There is no lid propping. Just put plugs in all the peepholes and press Start.

Better than hoods

The EnviroVent pulls fumes from the kiln before they can enter the room. It's compact and unobtrusive--no pulleys, no counterweights, no overhead installation. Flexible ducting lets you move kilns around the room. And the air-cooled motor will not overheat from normal firings.

Certified safe

The EnviroVent is UL listed when installed with a Skutt kiln bearing the UL mark and meets standard building codes in most jurisdictions.